EXact basis VEX100

EXact basis VEX1003004525-2017-06-28 5. Alarms 5.1 Alarms and info (Menu 4) Alarms NB List of alarms Alarms are shown in the event of unit faults or irregular operation ● Check the Current list (Menu 4) for alarm messages and refer to the list of alarms given at the end of these instructions. Main menu Operating mode > Operating readings > Settings > Alarm and info > Time and weekly plan > Versions > Safety functions > Service > Exit technician menu > Save settings > 4 Alarm and info Alarm Yes Warning No Information No Reset alarms > No Current list > Alarm log list > Delete alarm log > No 4.5 Current list Alarm 01 2017-05-17 Alarm 02 2017-05-17 Alarm 03 2017-05-17 Alarm 04 2017-05-17 Alarm 05 2017-05-17 01144 10:54:17 02144 11:01:12 03073 18:22:50 12012 18:25:00 13071 19:00:00 The active alarms can be seen in the current list of alarms in Menu 4.5. 5.2 Reset alarms Alarm causes must be found Menu 4 An alarm can be reset once the cause has been remedied. All alarms may be reset by selecting reset alarms in Menu 4 More than one alarm Alarms trigger again If several alarms are active, they will all be reset simultaneously. If an alarm repeatedly triggers, contact a service technician. 5.3 Alarm display – causes of errors Alarms shown in display In the event of unit alarms/warnings, one of the following icons on the right side of the menu bar is shown – go to current list of alarms to see alarm. Current list Main menu Operating mode > Operating readings > 4.5 Current list Alarm 01 2017-05-17 Alarm 02 2017-05-17 Alarm 03 2017-05-17 Alarm 04 2017-05-17 Alarm 05 2017-05-17 01144 10:54:17 02144 11:01:12 03073 18:22:50 12012 18:25:00 13071 19:00:00 Main menu Operating mode > Operating readings > 69/112Side 68Side 70